Copy trades across prop firms
One leader drives followers at any firm, each with its own ratio and contract cap. An account can lead several groups at once.
NewCrossover — copy NQ futures to NAS100 CFDs
The trade copier for prop firm tradersOne leader.Every account follows.
Trade your leader the way you always do. PropSyncer keeps every follower on the same net position — across prop firms, across platforms, from futures to forex — sized to each account and corrected on every move.
Windows desktop app · runs on your PC · installer or portable
Connects to
NinjaTrader
Tradovate
Rithmic
Topstep
MetaTrader 5
cTrader
TradeLocker
DXtrade
8
Platforms
futures and forex/CFD, one copier
2
Markets
and Crossover between them
<5ms
To plan a copy
our own share — the fill is your broker’s
0
Rounded up
under-trade, never over-trade
Highlights
A trade copier built for prop firm accounts.
Six things decide whether a copier keeps an evaluation alive. This is what PropSyncer does about each.
NQNAS100
1 × $20 ÷ $10 = 2.00 lots
Futures to forex, and back
EliteCrossover drives NAS100 from NQ — or futures from a CFD leader — sized by the point value your broker reports, never by the symbol’s name.
Stops and targets included
Futures followers mirror your working stop and target. CFD followers get them on the position, at the same distance from their own fill.
Target+3
Holding+2
Send+1
Self-correcting by design
Every move recomputes each follower from scratch, so a rejected order, a dropped socket or a manual trade is fixed on the next move — not compounded.
Daily loss62%
Trades today40%
Open contracts80%
Risk rules before every order
Daily loss and profit limits, trade counts and contract caps are checked before anything is sent. A rule that cannot be evaluated blocks the trade.
Your PCBrokerdirect
Runs on your own PC
Copying is local and your broker logins are encrypted on your machine. There is no server between your leader and your followers.
Built around one decision
Copy the position, not the orders. Every follower’s target is recomputed from scratch on each leader move, so a rejection, a dropped socket or a manual trade corrects itself instead of compounding.
Leader +2 → each follower recomputed from its ratio, always rounded down
When something goes wrong mid-session.
Copying orders and copying the position look the same until something breaks. This is what each one does next.
PropSyncerA follower’s order is rejectedOrder copier · That follower stays off for the rest of the tradePropSyncer · The next leader move recomputes it from scratch
You trade a follower by handOrder copier · Every later copy builds on the differencePropSyncer · Pulled back to its target on the next move
The connection drops mid-moveOrder copier · Missed orders are never replayedPropSyncer · Targets are absolute — it lands on the right size
Leader trades 1, follower is half sizeOrder copier · Rounds up to 1 — a full-size tradePropSyncer · Truncates to 0 — never over-trades
NQ leader, NAS100 followerOrder copier · Copies the quantity — exposure off by up to 20×PropSyncer · Sized by the point value your broker reports
Two groups share a followerOrder copier · Both copy it — the follower doubles upPropSyncer · Refused when the groups are built
Crossover · Elite
Trade futures.Copy to forex.
A futures leader can drive CFD followers on MetaTrader 5, cTrader, TradeLocker and DXtrade — and a CFD leader can drive futures. Size, stop and target are converted, not renamed.
NinjaTraderFutures · NQLeader- PositionLong 1 NQ$20 / pt
- Entry21,450.00
- Stop21,425.00−25.00
- Target21,500.00+50.00
PropSyncer converts01 / 04cTraderCFD · NAS100Follower- PositionLong 2.00 lots$10 / pt
- Entry21,398.20own fill
- Stop21,373.20−25.00
- Target21,448.20+50.00
Both directions
NQ drives NAS100, and a NAS100 leader can drive NQ or MNQ. Into futures, size rounds down to whole contracts — less than one is skipped.
Nothing rounds up
Below a broker’s minimum lot, a copy is skipped. 0.005 lots clamped to 0.01 would be a double-size position, not a half-size one.
Hedging-safe closes
On a CFD account a reduction closes positions, oldest first. It never sends the opposite order that would open a second position beside the first.
Worth knowing: a bracket that scales out across several targets is not carried to CFD followers yet, and no stop or target crosses from a CFD leader into futures — the follower gets none rather than a wrong one, and the app warns you.
Inside the app
The screens you will live in.
The app itself, running here with sample data. Scroll to a screen and the pointer walks you through it.
Platforms
Every platform your firms run on.
Four futures routes and four forex and CFD platforms, in one copier. A leader on one can drive followers on another, evaluation accounts included.
NinjaTraderSupported
TradovateSupported
RithmicSupported
TopstepSupported
MetaTrader 5BetacTraderSupported
TradeLockerNew
DXtradeNewTradovate and Rithmic logins connect through NinjaTrader with PropSyncer Link. Topstep connects through the TopstepX API. MetaTrader 5 is in beta.
Setup
Running in three steps.
- 01
Connect your platforms
Install PropSyncer Link into NinjaTrader, or sign in to TopstepX, MetaTrader 5, cTrader, TradeLocker or DXtrade. Every account those logins hold appears in one list.
- 02
Build your group
Pick the leader, add your followers, set a ratio and a contract cap for each. Defaults cover the rest.
- 03
Arm and trade
Trade the leader as you always do. Followers track its net position while the risk rules watch every dispatch.
Check your firm first
Copying between your own accounts is allowed at some firms and not others, and the answer can differ between evaluation and funded stages. Read your firm’s terms before you arm a group.
One trader, one set of accounts
PropSyncer is for copying between accounts you own. Feeding accounts belonging to different people is the shared-signal pattern prop firms prohibit and detect — it puts those accounts at risk, so we do not support it.
Safeguards
Built to protect every account you run.
Copy to every account at once, with risk limits, prop-firm rules and your privacy built in from the first order.
Before an order
Every copy checked before it is sent- One clean copyExactEach follower copies its leader exactly once.
- Prop-firm rules built inCompliantTopstep’s copy rules, applied per account.
- Your markets, your choiceYour callCopy futures, forex, or both — one switch.
During a trade
Protection while positions are open- Daily loss limitProtectedStops at your limit and closes out cleanly.
- Clean forex exitsCleanCloses the position itself, every time.
- Steady when brokers are busySteadyA busy broker never locks your account.
On your PC
Private, and yours to control- Your logins stay yoursPrivateEncrypted on your machine, never sent to us.
- Rides out a dropped line24hYour licence holds for 24 hours offline.
- Your trades, your callIn controlPausing never closes your open trades.
FAQ
The questions we actually get.
Short answers about what the copier does for you. Anything specific to your accounts is better asked directly.
Kept private
We do not publish how the copier is built, which firms a customer runs, or any account detail. Rule questions belong with your firm; setup questions belong in a conversation with us.
What does PropSyncer do?
It keeps the accounts you own in step with one of them. You trade your leader account as usual, and your followers track its net position. Each follower has its own size setting, so they do not all have to trade the same quantity.
Which platforms does PropSyncer work with?
On the futures side, NinjaTrader — and through it the Tradovate and Rithmic logins NinjaTrader holds — and Topstep through TopstepX. On the forex and CFD side, MetaTrader 5, cTrader, TradeLocker and DXtrade. A leader on one platform can drive followers on another.
Can I copy futures trades to forex or CFD accounts?
Yes, on the Elite plan. A futures leader can drive CFD followers — NQ to NAS100, for example — and a CFD leader can drive futures followers. Size is converted by the point value your broker reports, never by the symbol name, and anything that would round up to a bigger position is skipped instead.
Can it copy between accounts at different firms?
Yes — it works at the platform level rather than inside any one firm, so accounts held at different firms can sit in the same group. Whether you may do that is a question for the firms involved, not for us.
Does my prop firm allow copy trading?
That is the firm’s call, and the answer varies between firms, between account types and between evaluation and funded stages. We do not publish a rulebook per firm: those terms change without notice, and a stale summary on our site would be worse than none. Read your firm’s own documentation and ask its support in writing before you copy anything.
Can I copy to someone else’s accounts?
No. PropSyncer is for copying between accounts belonging to one trader. Driving other people’s accounts from one signal is the pattern firms prohibit and look for, and we do not support it.
Are my stops and targets copied too?
Yes. A futures follower receives your working stop and target orders. A forex or CFD follower receives them as a stop-loss and take-profit on its own position, at the same distance from its own entry. A bracket that scales out across several targets is not carried to CFD followers yet — the app warns you rather than guessing.
Do I need Pro or Elite?
Pro if every account you copy trades futures. Elite if any of them trades forex or CFDs, or if you want Crossover — copying between the two markets. Both run the same copier and the same safeguards.
Where do my broker logins live?
On your own machine, encrypted with a key that machine holds. They are not sent to us, and nothing about your trading has to leave your PC for copying to work.
Do I need a VPS?
It runs on your own Windows PC, so a VPS is a convenience rather than a requirement. Some firms have their own views on where and on how many devices you may trade — check yours before you move it onto hosted hardware.
What happens if my connection drops?
Copying is local, so a brief outage does not stop it, and there is a grace period before anything locks. If the app does lock, it stops copying and leaves your open positions exactly where they are — closing them for you could breach your firm’s rules.
How much detail will you publish about how it works?
Not much more than this page. The replication behaviour and the safeguards are described because a trader needs them to judge the tool; the implementation, our customers’ setups and anything that identifies an account stay private.
I have a question that is not here.
Ask us on Discord. Setup questions — which firms you trade, how many accounts, how you want them sized — are handled in a private conversation rather than in public.
Pricing
Two plans. One copier.
Pro copies your futures desk. Elite adds forex, CFD and Crossover — a futures leader driving CFD followers across markets.
Contact us
Pro
Futures
Net-position copying across every futures account — the prop-firm desk, done.
Talk to us
Features
- Futures copying — Topstep, Rithmic, Tradovate
- NinjaTrader bridge for every eligible account
- Net-position copying with per-follower ratios and caps
- Risk rules that fail closed — lockout never flattens
- Groups, journal and reports
Recommended
Contact us
Elite
Futures + Forex
Everything in Pro, plus forex/CFD copying and Crossover — drive CFD followers from a futures leader, across markets.
Talk to us
Features
- Everything in Pro
- Forex & CFD copying — MT5, cTrader, TradeLocker, DXtrade
- Both mode — every account, both copiers, one screen
- Crossover — a futures leader driving CFD followers
- Sizing across markets by point value, never a rename
Prices in USD. Every plan runs on Windows and includes updates.
Get started
Put it on your accounts.
Tell us which firms and platforms you trade and how many accounts you run, and we will set you up.